Circuit Breaker Installation and Repairs

Circuit Breaker Services in New Jersey

A circuit breaker that trips repeatedly, feels hot to the touch, or won't reset is a safety issue. Brighton Electric diagnoses the root cause—whether it's an overloaded circuit, a failing breaker, or a wiring fault—and makes the repair correctly.

We install new breakers when you're adding appliances or equipment, replace obsolete or damaged units, and verify that every breaker in your panel is properly sized for its circuit. All work is performed to NEC standards and local code.

---

When to Call for Breaker Service

• Frequent tripping on the same circuit
• Breaker won't reset or immediately trips again
• Burning smell or scorch marks near the panel
• Hot breaker or buzzing sounds
• Adding a new appliance that requires a dedicated circuit
• GFCI or AFCI breaker malfunctions

---

Our Process

We open the panel, test voltage and continuity, identify the problem breaker or circuit, and replace or repair as needed. If the issue is downstream—a short in the wiring or a faulty outlet—we trace and fix that too.

Every breaker we install is matched to the panel manufacturer and rated for the wire gauge and load. We label circuits clearly and confirm proper operation before closing up.

---

Code Compliance and Safety

Modern code requires AFCI protection in bedrooms and living areas, and GFCI protection in kitchens, baths, garages, and outdoor circuits. If your panel still has older breakers, we'll recommend upgrades that bring you into compliance and reduce fire risk.

We pull permits when required and coordinate inspections so the work is documented and legal.